Русский

Home Back to Products Inventory Service News & Events Contact Info Evaluation Forms

P1 AN/FO Loader Features Unsurpassed high capacity AN/FO loading; available with standard single 1,250 lb (570 kg) vessel or two vessels ranging from 550 lb (250 kg) to 2,000 lb (900 kg) each. Proven DUX articulated carrier with clean-burning Deutz Diesel engine and Dana SOH power train. Remote controls for upper and lower level operation. Comes with emergency hydraulic power pack for operating unit with diesel engine shut down. Self-leveling aerial manlift boom, also available with optional scissor lift platform with side wings for one set-up face coverage and maximum production. Fully self-contained unit with on-board compressor. Articulated heavy-duty frames made to withstand the high impact and torsional stress associated with mining application, frames come with a five-year unlimited guarantee Large high tensile alloy steel pins located in replaceable anchor bushings Easy access to all service points. Excellent service and parts back-up worldwide. For high production and cost reduction, choose a DUX AN/FO Loader. P1 AN/FO Loader Technical Specifications Dimensions Radius Engine Transmission Axles Tires Brakes Steering Oscillation Oper. Comp. Stabilizers Hydraulics Tanks Electrical DBB8 Boom Press. Vessels Options Overall Dimensions Length 32'-0" 9 750 mm Width 7'-0" 2 130 mm Height over canopy 7'-8" 2 340 mm Turning Radius Inside 17'-10" 5 435 mm Outside 26'-9" 8 155 mm Angle of turning radius 41°   Engine Make Deutz Model BF4M-1013C liquid cooled Power 156 HP (116 kW) @ 2300 rpm Cylinders 4 Aspiration Turbocharged, after cooled Displacement 290 in3 (4.76 L) Starter 24 volt electric Air intake cleaner Donaldson two-stage dry-type with service gauge Exhaust system Catalytic purifier with integrated silencer Cooling Liquid with air intercooling MSHA part 7-B vent rate 8 500 CFM (241 m3/min) Powershift Transmission Make Dana SOH Model Long drop, HR24000 series with integrated torque converter and flex plate drive Speeds in forward/reverse 3 Axles Make Dana SOH Model 176 planetary front and rear with internal multiple wet-type 4-wheel disc brakes for emergency/parking Dynamic load capacity per axle 27,000 (12 200 kg) Tires - 12.00-20, 16 ply, (makes and sizes available on request) Brakes Service 4-wheel power multi internal wet disc, dual hydraulic power control with accumulator back-up Emergency/Parking Fail safe 100% back-up spring applied hydraulic released multi-internal wet 4-wheel brakes (SAHR), no driveline brake required Automatic Brake Applicator Applies secondary brake in case of engine failure or pressure drop in torque converter Steering - Articulated frame hydraulic power steering, orbital valve-type with steering wheel, cushion valve and constant flow meter - One double-acting steering cylinders with 4" (102 mm) bore - + 41° steering angle each way for a total of 82° Oscillation - + 10° center of oscillation for a total of 20° - Large sized and heavy-duty for minimum maintenance and a smooth ride, four wheel ground contact guaranteed on uneven terrain Operator's Compartment - Side seated for maximum visibility and bi-directional operation - Heavy-duty adjustable driver and co-driver suspension seat with arm rests and retractable seat belt - Co-driver's adjustable suspension seat and seat belt - Shock mounted compartment floor for maximum comfort - All controls and gauges located within easy reach and view of operator Stabilizers - Two totally enclosed 18" (455 mm) boom-side stabilizers with built-in safety locks Hydraulic System system pressure 2000 PSI (13.8 Mpa) filters Suction 100 mesh Inline high pressure 10 micron with service gauge hoses 3/4" inside diameter and over, 4-spiral wire braid with crimped hose end swivel fittings, hose bulk-head located mid-ship Tank Capacities Hydraulic oil 80 gallons 303 L Fuel 45 gallons 170 L Electrical System - 24 volt system - 60 amp marine-type alternator with integrated sealed voltage regulator - Main electric cut off switch - Heat resistant, sealed electric wire harness - Sealed junction box and instrument panel box with multi-pole Amphenol connectors - Semi-automatic circuit breakers - Two front, four rear and two all-directional halogen high-intensity lights, shock mounted, with necessary switches - Strobe light, red or blue - Two heavy-duty batteries - Signal horn and audible, adjustable back-up alarm DBB8 Self-Leveling Aerial Boom for Personnel - 30-ft x 25-ft (w x h) face coverage - 42" (1 067 mm) safety hand rail height of - 5'-0" X 3'-3" (1525 X 990 mm) basket size - 1200 lb (545 kg) safe lift capacity - Basket controls in manlift basket, as well as additional dual controls (override) in operator's compartment for lowering and swinging boom - Diesel start/stop control - Storage platform for (6) AN/FO bags - Wood-lined storage box for (2) cases of stick powder, blasting caps and primers AN/FO Pressure Vessel - 1,250 lb (570 L) capacity - Stainless steel - 100 PSI (7 Bar) working pressure, - Complete with manhole and 10" (254 mm) filling funnel with automatic closure - Remote AN/FO control for operation from ground or aerial manlift - Push-button type controls complete with (2) low static loading hoses with air pressure regulator valves and all necessary automatic loading valves, stainless steel elbows and explosives grounding line Options - Smaller DEUTZ F6L-912W engine - Multi-purpose forklift attachment for one pallet mounted AN/FO module or pallet mounted grouting pump - DUX aerial manlift boom for 30'-0" (9,14 m) wide x 30'-0" (9,14 m) high face coverage   Alternatively, scissor lift platform - On-board hydraulic motor driven compressor   Alternatively, electrically driven on-board air compressor and electric hydraulic powerpack for operation with diesel engine shut-off - Two (2) totally enclosed engine side stabilizers with built-in safety locks and controls - Fire suppression system - Automatic lubrication system For more information on this product, other options or custom-built equipment; please contact us Specifications subject to change without notice