|
|
 |
The field-proven, articulated compact DUX DT-12 underground four-wheel drive dump truck is easily manoeuvrable in confined areas and well suited for narrow vein mining. |
|
High power to weight ratio assures fast tramming up steep ramps. |
|
Proven Dana SOH powershift transmission and planetary axles. |
|
Large sized, heavy-duty roller bearing for minimum maintenance, a smooth ride and four-wheel ground contact on uneven terrain. |
|
Frames designed and built to withstand high impact and torsional stress associated with mining application, covered by five-year warranty. |
| Dump body made from impact, wear resistant, reinforced alloy steel plates for extra-long service life. |
| Clean and rapid discharge cycles guaranteed with smooth flow dump box profile and 70° dump angle. |
|
Large operator's compartment, side seated for optimum visibility and bi-directional tramming. |
| Easy access to all service points. |
|
Excellent service and parts back-up worldwide. |
 |
 |
| Weights |
| Payload |
12.0 tons |
10.9 tonnes |
| Machine weight, approx. |
10.3 tons |
9.4 tonnes |
| GVW |
22.3 tons |
20.2 tonnes |
| SAE Dump Body Volume* |
| Struck |
6.6yd3 |
5.0m3 |
| Heaped |
7.8yd3 |
6.0m3 |
| *Other dump body sizes available to suit specific weight of material to be hauled. |
| Overall Dimensions |
| Length |
22'-4" |
6 810 mm |
| Width |
6'-0" |
1 830 mm |
| Height over dump body sides |
6'-3" |
1 905 mm |
| Height req'd at max. dump angle |
11'-6" |
3 500 mm |
| Maximum dumping angle |
70° |
|
| Turning Radius |
| Inside |
14'-3" |
4 345 mm |
| Outside |
21'-0" |
6 400 mm |
| Angle of turning radius |
41° |
|
| Engine |
|
| Make |
Deutz |
| Model |
BF4M-1013C liquid cooled |
| Power |
156 HP (116 kW) @ 2300 rpm |
| Cylinders |
4 |
| Aspiration |
Turbocharged, after cooled |
| Displacement |
290 in3 (4.76 L) |
| Starter |
24 volt electric |
| Air intake cleaner |
Donaldson two-stage dry-type with service gauge |
| Exhaust system |
Catalytic purifier with integrated silencer |
| Cooling |
Liquid with air intercooling |
| MSHA part 7-B vent rate |
8 500 CFM (241 m3/min) |
| Powershift Transmission |
| Make |
Dana SOH |
| Model |
Long drop, HR 24 000 series with integrated torque converter and flex-plate drive |
| Speeds in forward/reverse |
3 |
| Axles |
|
| Make |
Dana SOH |
| Model |
176 planetary front and rear with internal multiple wet-type 4-wheel disc brakes |
| Dynamic load capacity/axle |
27,000 lb (12 200 kg) |
| Tires |
| Michelin 12.00R24 X-Mine D2, L5 tubeless (other makes/sizes available) |
| Brakes |
| Service |
Four-wheel power multi-internal wet disc, dual hydraulic power control with accumulator back-up |
| Emergency/Parking |
Fail safe 100% back-up spring applied hydraulic released multi-internal wet four-wheel brakes |
| Automatic Brake Applicator |
Applies secondary brake in case of engine failure or pressure drop in torque converter |
| Options |
| - |
Caterpillar ACERT or Cummins engine |
| - |
FOPS/ROPS canopy or fully equipped operator's cab |
| - |
Co-driver's suspension seat |
| - |
Fire suppression system |
| - |
Automatic lubrication system |
| - |
Back-up camera and monitor |
| - |
For more information on this product, other options or custom-built equipment; please contact us or submit appropriate evaluation form |
|
Specifications subject to change without notice |
| Travel Speeds* |
| % Grade |
1st Gear |
2nd Gear |
3rd Gear |
| 0 |
2.4 (3.9) |
4.6 (7.4) |
10.5 (17.4) |
| 5 |
2.3 (3.7) |
4.2 (6.8) |
9.0 (14.5) |
| 10 |
2.1 (3.4) |
3.7 (6.0) |
6.2 (10.0) |
| 15 |
2.0 (3.2) |
3.3 (5.3) |
3.7 (6.0) |
| 20 |
1.9 (3.1) |
3.1 (5.0) |
- |
| | *Travel speeds shown in MPH (km/h) with loaded machine, in
forward and reverse. |
|
