|
|
 |
The DUX DT16 high capacity articulated low profile four-wheel drive dumper is designed for narrow vein mining and small tunnels. DUX also offers the model DT16C, a more compact version of the standard DT16 equipped with tailgate. |
|
High power to weight ratio assures fast tramming up steep ramps. |
|
Proven Dana SOH powershift transmission and planetary axles. |
|
Fail-safe spring applied hydraulically released four-wheel POSI-STOP brake system for long service life. |
|
Large sized, heavy-duty roller bearing for minimum maintenance, a smooth ride and four-wheel ground contact on uneven terrain. |
|
Frames designed and built to withstand high impact and torsional stress associated with mining application, covered by five-year warranty. |
|
Dump body made from impact, wear resistant, reinforced alloy steel plates for extra-long service life. |
|
Clean and rapid discharge cycles guaranteed with smooth flow dump box profile and 70° dump angle. |
|
Large operator's compartment with shock mounted floor for comfort and safety, operator side seated for optimum visibility and bi-directional
tramming. |
|
Easy access to all service points. |
|
Excellent service and parts back-up worldwide. |
 |
| Weights |
DT16 - tons |
tonnes |
DT16C - tons |
tonnes |
| Payload |
16.5 |
15.0 |
16.0 |
14.5 |
| Machine weight, approx. |
16.4 |
14.9 |
15.6 |
14.2 |
| GVW |
32.9 |
29.9 |
31.6 |
28.7 |
| SAE Dump Body Volume* |
DT16 - yd3 |
m3 |
DT16C - yd3 |
m3 |
| Struck |
10.5 |
8.0 |
8.0 |
6.1 |
| Heaped |
12.0 |
9.2 |
10.0 |
7.7 |
| *Other dump body sizes available to suit specific weight of material to be hauled. |
| Overall Dimensions |
DT16 |
mm |
DT16C |
mm |
| Length |
25'-6" |
7 775 |
24'-2" |
7 365 |
| Width |
7'-0" |
2 135 |
7'-0" |
2 135 |
| Height over dump body sides |
7'-5" |
2 260 |
7'-0" |
2 135 |
| Height req'd at max. dump angle |
12'-10" |
3 910 |
11'-10" |
3 605 |
| Maximum dumping angle |
70° |
|
|
|
| Turning Radius |
DT16 |
mm |
DT16C |
mm |
| Inside |
11'-4" |
3 445 |
9'-1" |
2 770 |
| Outside |
20'-2" |
6 150 |
17'-0" |
5 180 |
| Angle of turning radius |
45° |
|
| Engine | |
|
| Make |
Deutz |
| Model |
BF6M-1013ECP |
| Power |
236 HP (176 kW) @ 2300 rpm |
| Cylinders |
6 |
| Aspiration |
Turbocharged, after cooled |
| Displacement |
436 in3 (7.14 L) |
| Starter |
24 volt electric |
| Air intake cleaner |
Donaldson two-stage dry-type with service gauge |
| Exhaust system |
Catalytic purifier with integrated silencer |
| Cooling |
Liquid and air charge integrated Deutz cooling package |
| MSHA part 7-B vent rate |
10 500 CFM (297 m3/min) |
| Axles |
|
| Make |
Dana SOH |
| Model |
16D with high traction differential and POSI-STOP brakes on all four wheel ends |
| Dynamic load capacity/axle |
42,000 lb (19 051 kg) |
| Tires |
| - |
Bridgestone, 14.0024, 20 ply D2A RLS L-4 tube-type, (other makes and sizes available) |
| Brakes |
| Service |
Four-wheel POSI-STOP totally enclosed multi-disc, liquid cooled, spring applied hydraulically released with accumulator back-up and its own independent circulating cooling system |
| Emergency/Parking |
Same as service (POSI-STOP) |
| Automatic Brake Applicator |
Applies secondary brake in case of engine failure or pressure drop in torque converter |
| Tank Capacities |
| Hydraulic oil |
56 gallons |
212 L |
| Fuel |
56 gallons |
212 L |
| Brake cooling oil |
25 gallons |
95 L |
| Options |
| - |
DUX model DT16C (compact version of DT16) with automatic tailgate |
| - |
Different engine |
| - |
FOPS/ROPS canopy or fully equipped operator's cab |
| - |
Automatic tail-gate |
| - |
Automatic lubrication system |
| - |
Fire suppression system |
| - |
Back-up camera and monitor |
| - |
For more information on this product, other options or custom-built equipment; please contact us or submit appropriate evaluation form |
|
Specifications subject to change without notice |
|
