Русский

Home Back to Products Inventory Service News & Events Contact Info Evaluation Forms

DT18 Features The DUX DT18 high capacity compact profile articulated four-wheel drive dumper is designed for the transport of ore, waste rock and back-fill on level and steep ramps. Equipped with hydraulically operated, leakproof tailgate with fully automatic adjustable locking device for excellent load retention of slurry mix on level and steep ramps. High power to weight ratio assures fast tramming up steep ramps. Proven Dana SOH powershift transmission and planetary axles. Fail-safe spring applied hydraulically released four wheel POSI-STOP brake system for long service life. Large sized, heavy-duty roller bearing for minimum maintenance, a smooth ride and four-wheel ground contact on uneven terrain. Frames designed and built to withstand high impact and torsional stress associated with mining application, covered by five-year warranty. Dump body made from impact, wear resistant, reinforced alloy steel plates for extra-long service life. Clean and rapid discharge cycles are guaranteed with smooth flow dump box profile and 65° dump angle. Large operator's compartment with shock mounted floor for comfort and safety, operator side seated for optimum visibility and bi-directional tramming. Easy access to all service points. Excellent service and parts back-up worldwide. DT18 Technical Specifications Weights Volume Dimensions Turning Radius Engine Converter Transmission Axles Tires Brakes Tanks Options Weights Payload 18.0 tons 16.3 tonnes Machine weight, approx. 17.0 tons 15.4 tonnes GVW 35.0 tons 31.7 tonnes SAE Dump Body Volume* Struck 10.4 yd3 8.0 m3 Heaped 12.2 yd3 9.3 m3 *Other dump body sizes available to suit specific weight of material to be hauled. Overall Dimensions Length 25'-2" 7 670 mm Width 7'-6" 2 285 mm Height over dump body sides 7'-6" 2 285 mm Height req'd at max. dump angle 12'-10" 3 910 mm Maximum dumping angle 65° Turning Radius Inside 12'-10" 3 910 mm Outside 21'-4" 6 500 mm Angle of turning radius 42° Engine Make Deutz Model BF6M-1013ECP Power 236 HP (176 kW) @ 2300 rpm Cylinders 6 Aspiration Turbocharged, after cooled Displacement 436 in3 (7.14 L) Starter 24 volt electric Air intake cleaner Donaldson two-stage dry-type with service gauge Exhaust system Catalytic purifier with integrated silencer Cooling Liquid and air charge integrated Deutz cooling package MSHA part 7-B vent rate 10 500 CFM (297 m3/min) Torque Converter Make Dana SOH Model CL300 series with automatic lock-up and flex-plate drive Powershift Transmission Make Dana SOH Model Long drop, R 32 000 series Speeds in forward/reverse 4 Axles Make Dana SOH Model 16D with high traction differential and POSI-STOP brakes on all four wheel ends Dynamic load capacity/axle 42,000 lb (19 051 kg) Tires - Bridgestone 16.00-25, 24 ply E-4 R-LUG (RLS) TL (other makes and sizes available) Brakes Service Four-wheel POSI-STOP totally enclosed multi-disc, liquid cooled, spring applied hydraulically released with accumulator back-up and its own independent circulating cooling system Emergency/Parking Same as service (POSI-STOP) Automatic Brake Applicator Applies secondary brake in case of engine failure or pressure drop in torque converter Tank Capacities Hydraulic oil 56 gallons 212 L Fuel 60 gallons 227 L Options - Different engine - FOPS/ROPS canopy or fully equipped operator's cab - Back-up camera and monitor - Fire suppression system - Automatic lubrication system - For more information on this product, other options or custom-built equipment; please contact us or submit appropriate evaluation form Specifications subject to change without notice