Русский

Home Back to Products Inventory Service News & Events Contact Info Evaluation Forms

High Speed DT26 Features The DUX DT26 high speed compact profile articulated four-wheel drive dumper is designed for the transport of ore, waste rock and back-fill on level and steep ramps. High power to weight ratio assures fast tramming up steep ramps. Proven Dana SOH powershift transmission and planetary axles. Fail-safe spring applied hydraulically released four-wheel POSI-STOP brake system for long service life. Large sized, heavy-duty roller bearing for minimum maintenance, a smooth ride and four-wheel ground contact on uneven terrain. Frames designed and built to withstand high impact and torsional stress associated with mining application, covered by five-year warranty. Dump body made from impact, wear resistant, reinforced alloy steel plates for extra-long service life. Clean and rapid discharge cycles guaranteed with smooth flow dump box profile and 68° dump angle. Large operator's compartment with shock mounted floor for comfort and safety, operator side seated for optimum visibility and bi-directional tramming. Easy access to all service points. Excellent service and parts back-up worldwide. High Speed DT26 Technical Specifications Weights Volume Dimensions Turning Radius Engine Transmission Torque Axles Tires Brakes Tanks Options Weights Payload 28.0 tons 25.4 tonnes Machine weight, approx. 25.0 tons 22.7 tonnes GVW 53.0 tons 48.1 tonnes SAE Dump Body Volume* Struck 15.8 yd3 12.0 m3 Heaped 19.6 yd3 15.0 m3 *Other dump body sizes available to suit specific weight of material to be hauled. Overall Dimensions Length 31'-2" 9 500 mm Width 9'-0" 2 745 mm Height over dump body sides 7'-4" 2 235 mm Height req'd at max. dump angle 16'-0" 4 875 mm Maximum dumping angle 68° Turning Radius Inside 16'-4" 4 980 mm Outside 27'-9" 8 460 mm Angle of turning radius 41° Engine Make Detroit Diesel Model Series 60 DDEC 12.7L with Electronic Control Management System Power 400 HP (298 kW) @ 2100 rpm Cylinders 6 Aspiration Turbocharged, after cooled Displacement 778 in3 (12.7 L) Starter 24 volt electric Air intake cleaner Donaldson two-stage dry-type with service gauge Exhaust system Catalytic purifier with integrated silencer Cooling Large-sized integrated water radiator, charge air cooler and air over oil transmission cooler MSHA part 7-B vent rate 25 000 CFM (708 m3/min) Torque Converter Make Dana SOH Model CL8000 series, single stage with automatic lock-up and flex-plate drive Powershift Transmission Make Dana SOH Model 6000 series Speeds in forward/reverse 4 Axles Make Dana SOH Model 19D with high traction differential and POSI-STOP brakes on all four wheel ends Tires - 18.00R25, 2 STAR E-4 tubeless radial (other makes and sizes on request) Brakes Service Four-wheel POSI-STOP totally enclosed multi-disc, liquid cooled, spring applied hydraulically released with accumulator back-up and its own independent circulating cooling system Emergency/Parking Same as service (POSI-STOP) Automatic Brake Applicator Applies secondary brake in case of engine failure or pressure drop in torque converter Tank Capacities Hydraulic oil 90 gallons 341 L Fuel 120 gallons 454 L Brake cooling oil 30 gallons 113 L Options - Onsite programmable automatic electronic transmission gear shifter - Different engine - FOPS/ROPS canopy or fully equipped operator's cab with air conditioning - Automatic lubrication system - Automatic tailgate - Fast fill system - Fire suppression system - Back-up camera with display monitor (color) - Orbitrol wheel steering with operator facing forward - Dual wheel steering with 180° swivel seat for driving in forward and reverse - Loadman weighing system - Telma electro-magnetic retarder - EB-26 ejector box - Electronic parts manual (Catbase, LinkOne, others on request) - For more information on this product, other options or custom-built equipment; please contact us or submit appropriate evaluation form Specifications subject to change without notice