Русский

Home Back to Products Inventory Service News & Events Contact Info Evaluation Forms

P1 Maintenance Truck Features Mobile service station for the maintenance of underground mining equipment. Work bench equipped with vice. Ample storage for tool boxes and drawers. On-board compressor and retractable hose reels for powering pneumatic tools or adjusting tire pressure. Available with crane for lifting large components or handling tires. Reinforced bottle rack for oxygen or acetylene. Also available with onboard welding machine. Also available in cassette configuration. P1 Maintenance Truck Technical Specifications Dimensions Engine Transmission Axles Tires Brakes Steering Oscillation Oper. Comp. Hydraulics Tanks Electrical Electrical Options Overall Dimensions Length 26'-3" 8 000 mm Width 7'-8" 2 340 mm Height 7'-7" 2 310 mm Turning Radius Inside 14'-6" 4 420 mm Outside 23'-0" 7 000 mm Angle of turning radius 41° Engine Make Deutz Model BF4M-1013C liquid cooled Power 154 HP (115 kW) @ 2300 rpm Cylinders 4 Aspiration Turbocharged, after cooled Displacement 290 in3 (4.76 L) Starter 24 volt electric Air intake cleaner Donaldson two-stage dry-type with service gauge Exhaust system Catalytic purifier with integrated silencer Cooling Liquid with air intercooling MSHA part 7-B vent rate 8 500 CFM (241 m3/min) Powershift Transmission Make Dana SOH Model Long drop, HR24000 series with integrated torque converter and flex plate drive Speeds in forward/reverse 3 Axles Make Dana SOH Model 176 planetary front and rear with internal multiple wet-type 4-wheel disc brakes for emergency/parking Dynamic load capacity per axle 27,000 (12 200 kg) Tires - 12.00-20, 18 ply, (makes and sizes available on request) Brakes Service 4-wheel power multi internal wet disc, dual hydraulic power control with accumulator back-up Emergency/Parking Fail safe 100% back-up spring applied hydraulic released multi-internal wet 4-wheel brakes (SAHR), no driveline brake required Automatic Brake Applicator Applies secondary brake in case of engine failure or pressure drop in torque converter Steering - Articulated frame hydraulic power steering, orbital valve-type with steering wheel, cushion valve and constant flow meter - One double-acting steering cylinders with 4" (102 mm) bore - + 40°steering angle each way for a total of 80° Oscillation - + 10° center of oscillation for a total of 20° - Large sized and heavy-duty for minimum maintenance and a smooth ride, four wheel ground contact guaranteed on uneven terrain Operator's Compartment - Side seated for maximum visibility and bi-directional operation - Heavy-duty adjustable driver and co-driver suspension seat with arm rests and retractable seat belt - Co-driver's adjustable suspension seat and seat belt - Shock mounted compartment floor for maximum comfort - All controls and gauges located within easy reach and view of operator Hydraulic System System pressure 2000 PSI (13.8 Mpa) Filters Suction 100 mesh Inline high pressure 10 micron with service gauge Hoses 3/4" inside diameter and over, 4-spiral wire braid with crimped hose end swivel fittings, hose bulk-head located mid-ship Tank Capacities Hydraulic oil 45 gallons 170 L Fuel 45 gallons 170 L Electrical System - 24 volt system - 60 amp marine-type alternator with integrated sealed voltage regulator - Main electric cut off switch - Heat resistant, sealed electric wire harness - Sealed junction box and instrument panel box with multi-pole Amphenol connectors - Semi-automatic circuit breakers - Two front, four rear and two all-directional halogen high-intensity lights, shock mounted, with necessary switches - Two heavy-duty batteries - Signal horn and audible, adjustable back-up alarm Options - For more information on this product, other options or custom-built equipment; please contact us Specifications subject to change without notice.