|
|
 |
The DUX P1-Porter Multi-Purpose Cassette system is the ultimate labour efficient mine transport system. At the lowest capital equipment cost, it provides outstanding flexibility to rationalize the transport of personnel, materials and equipment. |
 |
With the DUX P1-Porter (prime mover), one man can load and unload multi-function cassettes smoothly and safely in minutes. The diesel powered Porter and multi-purpose cassettes cut down dramatically on idle equipment. The DUX P1-Porter Multi-Purpose Cassette system is less costly and achieves higher utilization than conventional utility equipment built for one specific task. |
 |
DUX cassettes available shown on this web page include fuel, flatbed, crane boom, lube, personnel, explosives, maintenance and water. Please contact Dux for information on AN/FO, remix, dump body, rescue or customized cassettes. The DUX line of multi-purpose cassettes is continually expanding to meet new customer requirements. |
 |
| Weights |
| Payload |
10.0 tons |
9.1 tonnes |
| Machine weight, approx. |
8.6 tons |
7.8 tonnes
| GVW |
18.6 tons |
16.9 tonnes | |
| Turning Radius |
| Inside |
14'-10" |
4 520 mm |
| Outside |
22'-10" |
6 960 mm |
| Angle of turning radius |
41° |
|
| Engine |
 |
| Make |
Deutz |
| Model |
BF4M-1013C liquid cooled |
| Power |
156 HP (116 kW) @ 2300 rpm |
| Cylinders |
4 |
| Aspiration |
Turbocharged, after cooled |
| Displacement |
290 in3 (4.76 L) |
| Starter |
24 volt electric |
| Air intake cleaner |
Donaldson two-stage dry-type with service gauge |
| Exhaust system |
Catalytic purifier with integrated silencer |
| Cooling |
Liquid with air intercooling |
| MSHA part 7-B vent rate |
8 500 CFM (241 m3/min) |
| Powershift Transmission |
| Make |
Dana SOH |
| Model |
Long drop, HR24000 series with integrated torque converter and flex plate drive |
| Speeds in forward/reverse |
3 |
| Axles |
| Make |
Dana SOH |
| Model |
176 planetary front and rear with internal multiple wet-type 4-wheel disc brakes for emergency/parking |
| Dynamic load capacity per axle |
27,000 (12 200 kg) |
| Tires |
 |
| - |
12.00-20, 18 ply, (makes and sizes available on request) |
| Brakes |
| Service |
4-wheel power multi internal wet disc, dual hydraulic power control with
accumulator back-up |
| Emergency/Parking |
Fail safe 100% back-up spring applied hydraulic released multi-internal wet 4-wheel brakes (SAHR), no driveline brake required |
| Automatic Brake Applicator |
Applies secondary brake in case of engine failure or pressure drop in torque converter |
| Steering |
| - |
Articulated frame hydraulic power steering, orbital valve-type with steering wheel, cushion valve and constant flow meter |
| - |
One double-acting steering cylinders with 4" (102 mm) bore |
| - |
+ 40° steering angle each way for a total of 80° |
| Oscillation |
| - |
+ 10°center of oscillation for a total of 20° |
| - |
Large sized and heavy-duty for minimum maintenance and a smooth ride, four wheel ground contact guaranteed on uneven terrain |
| Frames and Pins |
 |
| - |
Articulated heavy-duty frames made to withstand the high impact and torsional stress associated with mining application, frames come with a five-year unlimited guarantee |
| - |
Large high tensile alloy steel pins located in replaceable anchor bushings |
|
Operator's Compartment |
| - |
Side seated for maximum visibility and bi-directional operation |
| - |
Heavy-duty adjustable driver and co-driver suspension seat with arm rests and retractable seat belt |
| - |
Co-driver's adjustable suspension seat and seat belt |
| - |
Shock mounted compartment floor for maximum comfort |
| - |
All controls and gauges located within easy reach and view of operator |
| Hydraulic System |
| pumps |
Heavy-duty PTO-driven gear type pump driven from converter |
| Working hydraulic section |
25.0 gal/min (94.6 L/min) |
| System pressure |
2200 PSI |
| filters |
| Suction |
100 mesh |
| Inline high pressure |
10 micron with service gauge |
| hoses |
3/4" inside diameter and over, 4-spiral wire braid with crimped hose end swivel fittings, hose bulk-head located mid-ship |
| Electrical System |
 |
| - |
24 volt system |
| - |
60 amp marine-type alternator with integrated sealed voltage regulator |
| - |
Main electric cut off switch |
| - |
Heat resistant, sealed electric wire harness |
| - |
Sealed junction box and instrument panel box with multi-pole Amphenol connectors |
| - |
Semi-automatic circuit breakers |
| - |
Two front, two rear and one all-directional halogen high-intensity lights, shock mounted, with necessary switches |
| - |
Two heavy-duty batteries |
| - |
Signal horn and audible, adjustable back-up alarm |
| Options |
 |
| - |
Larger Model P2-Porter with 11 ton (10 tonnes) payload capacity |
| - |
Different engines |
| - |
Fire suppression system |
| - |
Fast fill system for fuel and hydraulic oil |
| - |
Automatic lubrication system |
| - |
FOPS/ROPS canopy or fully equipped operator's cab with noise suppression |
| - |
For more information on this product, other options or custom-built equipment; please contact us |
| |
Specifications subject to change without notice. |
| - |
7' (2135) wide x 12' (3660) long
platform with front header, 6" high sides, guide rails, steel floor and two tie-down straps |
| - |
Four totally enclosed hydraulic stabilizers, hydraulic quick connector couplings and cassette locking arrangement |
| - |
Three tonne crane lift capacity (HIAB Model 071A) rests on 7' (2135) wide x 12' (3660) long platform with hard wood floor and two tie-down straps |
| - |
Four totally enclosed hydraulic stabilizers, hydraulic quick connector couplings and cassette locking arrangement |
| Diesel fuel |
320 gallons |
1 211 L |
| Engine oil |
80 gallons |
303 L |
| Hydraulic oil |
110 gallons |
416 L |
| Waste oil |
80 gallons |
303 L |
| TOTAL* |
590 gallons |
2 233 L |
| + Standard grease drum |
25 gallons |
95 L |
| *DIFFERENT TANKS AND CAPACITIES AVAILABLE ON REQUEST |
| - |
Hose reels, dispenser pumps, hoses, nozzles and on-board compressor |
| - |
Four totally enclosed hydraulic stabilizers, hydraulic quick connector couplings and cassette locking arrangement |
| - |
1 200 US gallon (4 540 L) diesel fuel tank capacity with 30 US gallon/min (114 L/min) hydraulic motor driven dispenser pump and heavy-duty tank support base frame |
| - |
Four totally enclosed hydraulic stabilizers, hydraulic quick connector couplings and cassette locking arrangement |
 |
| - |
Totally enclosed wood lined compartment for detonator case storage with 4" thick vertical hard wood partition wall with steel backing to separate detonator compartment from AN/FO and powder stick pallet compartment |
| - |
Hinged sealed and lockable access doors(2) to detonator storage compartment, inside of doors completely wood lined |
| - |
Totally enclosed compartment to hold four 36" x 48"x 6" high pallets for powder stick cases; on each pallet, either up to thirty-two powder stick cases can be placed (25 kg/case - total weight 800 kg) or up to twenty-eight AN/FO bags (25 kg/bag - total weight 700 kg) |
| - |
Steel storage compartment floor covered with 2" thick rough finished wood planks to prevent sparks and sliding of pallets |
| - |
Rotating vents installed on roof (2) |
| - |
Lockable sliding doors (4), two on each side of cassette |
| - |
Longitudinal separation wall in center of compartment, wood lined on both sides to prevent sparks |
| - |
Explosives grounding lines (2) |
| - |
Dry chemical fire extinguishers (2) |
| - |
Wheel chucks to be used if machine movement should occur, storage brackets for wheel chucks also included |
| - |
Four totally enclosed hydraulic stabilizers, hydraulic quick connector couplings and cassette locking arrangement |
 |
| - | 13'-6" (4115 mm) long x 7'-6" (2285 mm) wide platform with two 2.6 cu. yd. (2.0 m3) stainless steel emulsion tanks surrounded by protective structure |
| - | Walkways, hand rails and ladder on both sides of cassette |
| - | Four totally enclosed stabilizers, hydraulic quick connector couplings and cassette locking arrangement |
| - | DUX emulsion loader with boom also available |
| - |
1 500 US gallon (5 678 L) water tank capacity with hydraulic motor driven dispenser pump, spray system and heavy-duty tank support base frame |
| - |
Four totally enclosed hydraulic stabilizers, hydraulic quick connector couplings and cassette locking arrangement |
| - | 4.2 to 5 cu. yd. (3.2 to 4 m3) capacity |
| - | Four totally enclosed stabilizers, hydraulic quick connector couplings and cassette locking arrangement |
| - | See DUX P1Shotcreter |
| - | Mobile service station for the maintenance and repair of underground mining equipment |
| - | Work bench equipped with vice |
| - | Ample storage for tool boxes and drawers |
| - | On-board compressor and retractable hose reels for powering pneumatic tools or adjusting tire pressure |
| - | Optional crane for lifting large components or handling tires |
| - | Reinforced bottle rack for oxygen or acetylene, available with on-board welding machine |
| - | Four totally enclosed stabilizers, hydraulic quick connector couplings and cassette locking arrangement |
| - | Available in truck configuration |
| - | 16 passenger carry capacity |
| - | 7'-0" (2 135 mm) wide x 12'-0" (3 660 mm) long |
| - | Four totally enclosed stabilizers, hydraulic quick connector couplings and cassette locking arrangement |
| - | DUX personnel carrier in truck configuration also available |
|