Русский

Home Back to Products Inventory Service News & Events Contact Info Evaluation Forms

P1 Shotcreter Features For maximum reach and coverage the DUX P1-SHOTCRETER is equipped with remote controlled robotic knuckle boom with extendable spray arm, all position spray head and liquid accelerator dosage pump (dry or wet) shotcrete system. Standard P1-SHOTCRETER can spray concrete on drift up to 40 feet (12.2 meter) high. Optional booms with greater reach are available. The shotcrete pump rests on a fork-lift device and can be easily detached. Forklift device can be used to carry loads of up to 2 tons. P1 Shotcreter Technical Specifications Weights Dimensions Turning Radius Engine Transmission Axles Tires Brakes Steering Oscillation Op. Comp. Stabilizers Hydraulics Tanks Electrical Spray Boom Shotcrete Mach. Liquid Acce. Fork-lift Att. Options Weights Machine weight, approx. 10.3 tons 9.4 tonnes Overall Dimensions Length 26'-5" 8 050 mm Width 6'-2" 1 880 mm Height with optional FOPS/ROPS canopy 7'-7" 2 310 mm Height with alt. encl. air conditioned cab 8'-6" 2 590 mm Turning Radius Inside 14'-8" 4 470 mm Outside 22'-10" 6 960 mm Angle of turning radius 40° Engine Make Deutz Model BF4M-1013C liquid cooled Power 156 HP (116 kW) @ 2300 rpm Cylinders 4 Aspiration Turbocharged, after cooled Displacement 290 in3 (4.76 L) Starter 24 volt electric Air intake cleaner Donaldson two-stage dry-type with service gauge Exhaust system Catalytic purifier with integrated silencer Cooling Liquid with air intercooling MSHA part 7-B vent rate 8 500 CFM (241 m3/min) Powershift Transmission Make Dana SOH Model Long drop, HR24000 series with integrated torque converter and flex plate drive Speeds in forward/reverse 3 Axles Make Dana SOH Model 176 planetary front and rear with internal multiple wet-type 4-wheel disc brakes for emergency/parking Dynamic load capacity per axle 27,000 (12 200 kg) Tires - 12.00 X 20, 18 ply (other makes and sizes on request) Brakes Service 4-wheel power multi internal wet disc, dual hydraulic power control with accumulator back-up Emergency/Parking Fail safe 100% back-up spring applied hydraulic released multi-internal wet 4-wheel brakes (SAHR), no driveline brake required Automatic Brake Applicator Applies secondary brake in case of engine failure or pressure drop in torque converter Steering - Side seated for maximum visibility and bi-directional operation - Articulated frame hydraulic power steering, orbital valve-type with steering wheel, cushion valve - Two double-acting steering cylinders - + 41° steering angle each way for a total of 82° Oscillation - + 10° center of oscillation for a total of 20° - Large sized and heavy-duty for minimum maintenance and a smooth ride, four wheel ground contact guaranteed on uneven terrain Frames and Pins - Articulated heavy-duty frames made to withstand the high impact and torsional stress associated with mining application, frames come with a five-year unlimited guarantee - Large high tensile alloy steel pins located in replaceable anchor bushings Operator's Compartment - Side seated for maximum visibility and bi-directional operation - Heavy-duty adjustable driver and co-driver suspension seat with arm rests and retractable seat belt - Co-driver's adjustable suspension seat and seat belt - Shock mounted compartment floor for maximum comfort - All controls and gauges located within easy reach and view of operator Stabilizers - Four totally enclosed stabilizers with built-in safety lock Hydraulic System Cylinders Hard chrome plated stems Steering 2 double acting with 4" (102 mm) bore Pumps Heavy-duty PTO-driven gear type pump driven from converter Working hydraulic section 25.0 gal/min (94.6 L/min) System pressure 2000 PSI (13.8 Mpa) Filters Suction 100 mesh Inline high pressure 10 micron with service gauge Hoses 3/4" inside diameter and over, 4-spiral wire braid with crimped hose end swivel fittings, hose bulk-head located mid-ship Tank Capacities Hydraulic oil 45 gallons 170 L Fuel 45 gallons 170 L Electrical System - 24 volt system - 60 amp alternator with integrated sealed voltage regulator - Main electric cut off switch - Heat resistant, sealed electric wire harness - Sealed junction box and instrument panel box with multi-pole Amphenol connectors - Semi-automatic circuit breakers - Two front, four rear and two all-directional halogen high-intensity lights, shock mounted, with necessary switches - Two heavy-duty batteries - Signal horn and audible, adjustable back-up alarm Robotic Shotcrete Spray Boom - Heavy-duty pedestal mounted rotation boom with vertical mast and knuckle boom, protective enclosure and two stabilizers - Boom arm has 15'-0" (4.57 m) extension for maximum coverage and reach - Minimum machine set-up time is required in back height of 22'-0" (6.7 m) - Spray boom equipped with Aliva model AL-302 all position spray head with two totally enclosed Rota actuators for swing and tilt, nozzle rotator protected against rebound and falling loose - Boom and spray head remote electric controls with five meter (16.4 ft.) long umbilical cord allow for maximum operator visibility from safe/clean position Shotcrete Machine - Aliva model AL-262 wet/dry shotcrete machine - Supplied with 16L rotor, steel skid mount to match DUX stabilizer assembly, hydraulic drive motor and compressed air drive - Total air requirement for air drive and shotcrete spraying is 450 CFM (12.7 m3/min) - Compressed air supplied by mine Liquid Accelerator - Aliva model AL-403 liquid accelerator - Dosage pump designed to operate in conjunction with Aliva model AL-262 wet/dry shotcrete machine, supplied with compressed air drive Multi-Purpose Fork-lift Attachment - Complete with two heavy-duty 4'-0" long adjustable forks anchored onto guide/slide shaft with heavy-duty support frame - Forklift attachment is interconnected with the two totally enclosed stabilizers for 30" (760 mm) total lift from ground - Two totally enclosed 30" (760 mm) stroke engine side stabilizers with built-in safety lock valves - Shotcrete machine can be detached from forks in minutes, P1-Carrier can then be utilized to lift and carry loads un to three tons Options - Electro/hydraulic power pack - Engine side stabilizers - Totally enclosed noise insulated pressurized operator safety cab - Automatic lubrication system - Deutz air-cooled or Caterpillar liquid-cooled engines - Electrical cable reel - Radio remote control - Fire suppression system - DUX Remix Cassette available for shotcrete transport - For more information on this product, other options or custom-built equipment; please contact us *Specifications subject to change without notice.