Русский

Home Back to Products Inventory Service News & Events Contact Info Evaluation Forms

TD16 Features The DUX TD16 four-wheel drive, high speed, articulated teledumper brings high capacity hauling capabilities on steep ramps and offers effective loading and dumping in headings as low as 9'-0" (2.75 m). Clean and rapid discharge cycles are guaranteed with smooth flow dump box profile and 60° dump angle. Evenly distributed 16 ton payload throughout patented telescopic dump box that retains slurry without leakage between optionally sealed telescopic body sections for excellent load retention on steep grades. Over 5 MPH (8 km/h) tramming speed up a 15% ramp with full payload. For maximum safety, reliability and low maintenance costs, the DUX TD16 is equipped with four-wheel POSI-STOP brake system. Large sized, heavy-duty roller bearing for minimum maintenance, a smooth ride and four-wheel ground contact on uneven terrain. Large operator's compartment with shock mounted floor for comfort and safety, operator side seated for optimum visibility and bi-directional tramming. Easy access to all service points. Excellent service and parts back-up worldwide. TD16 Technical Specifications Weights Volume Dimensions Turning Radius Engine Converter Transmission Axles Tires Brakes Teledump Box Tanks Options Weights Payload 16.5 tons 15.0 tonnes Machine weight, approx. 16.8 tons 15.3 tonnes GVW 33.3 tons 30.3 tonnes SAE Dump Body Volume* Struck 8.6 yd3 6.6 m3 Heaped 9.8 yd3 7.5 m3 *Other teledump body sizes available to suit specific weight of material to be hauled. Overall Dimensions Length 25'-6" 7 775 mm Width 7'-0" 2 135 mm Height over teledump body sides 7'-6" 2 285 mm Height req'd at max. teledump angle 9'-0" 2 750 mm Maximum teledumping angle 60° Turning Radius Inside 11'-4" 3 455 mm Outside 20'-2" 6 150 mm Angle of turning radius 45° Engine Make Deutz Model BF6M-1013ECP Power 200 HP (149 kW) @ 2300 rpm Cylinders 6 Aspiration Turbocharged, after cooled Displacement 436 in3 (7.14 L) Starter 24 volt electric Air intake cleaner Donaldson two-stage dry-type with service gauge Exhaust system Catalytic purifier with integrated silencer Cooling Liquid with air intercooling MSHA part 7-B vent rate 10 500 CFM (297 m3/min) Torque Converter Make Dana SOH Model C-273.5, single stage Powershift Transmission Make Dana SOH Model R28 000 series Speeds in forward/reverse 4 Axles Make Dana SOH Model 16D on front and rear with high traction differential and POSI-STOP brakes on all four Dynamic load capacity/axle 42,000 lb (19 051 kg) Tires - Michelin, 14R24 XKDIA, (other makes and sizes available) Brakes Service Four-wheel POSI-STOP totally enclosed multi-disc, liquid cooled, spring applied hydraulically released with accumulator back-up and its own independent circulating cooling system Emergency/Parking Same as service (POSI-STOP) Automatic Brake Applicator Applies secondary brake in case of engine failure or pressure drop in torque converter Teledump Box - Extra heavy-duty two-section design with double acting telescopic dump cylinders and 2 ejector cylinders - Teledump box made from impact, wear resistant alloy steel plates that are reinforced, lengthens service life substantially - Teledump box supported on rugged tipping frame, teledumping action is guided by 2 heavy-duty bottom roller bearings that run along hardened tracks and 2 extra heavy-duty adjustable and replaceable slide arrangements on top of teledump box Tank Capacities Hydraulic oil 56 gallons 212 L Fuel 56 gallons 212 L Brake cooling oil 25 gallons 95 L Options - Different engine - Automatic lubrication system - Fast fill system - Fire suppression system - Automatic tail gate - FOPS/ROPS canopy or enclosed fully equipped operator cab - Load measuring device - Back-up camera with display monitor - For more information on this product, other options or custom-built equipment; please contact us or submit appropriate questionnaire form Specifications subject to change without notice