DUX Machinery Corporation
  Русский
Home
Back to Products
Inventory
Service
News & Events
Contact Info
Evaluation Forms
DUX TD20
TD20 Features
The DUX TD20 four-wheel drive, high speed, articulated teledumper brings high capacity hauling capabilities on steep ramps and offers effective loading and dumping in headings as low as 10'-0" (3.05 m).
Clean and rapid discharge cycles are guaranteed with smooth flow dump box profile and 60° dump angle.
Evenly distributed 20 ton payload throughout patented telescopic dump box that retains slurry without leakage between optionally sealed telescopic body sections for excellent load retention on steep grades.
Over 5 MPH (8 km/h) tramming speed up a 15% ramp with full payload.
For maximum safety, reliability and low maintenance costs, the DUX TD20 is equipped with four-wheel POSI-STOP brake system.
Large sized, heavy-duty roller bearing for minimum maintenance, a smooth ride and four-wheel ground contact on uneven terrain.
Large operator's compartment with shock mounted floor for comfort and safety, operator side seated for optimum visibility and bi-directional tramming.
Easy access to all service points.
Excellent service and parts back-up worldwide.
Up
TD20 Technical Specifications
Weights Volume Dimensions Turning Radius
Engine Converter Transmission Axles
Tires Brakes Teledump Box Tanks
Options
Weights
Payload 20.0 tons 18.2 tonnes
Machine weight, approx. 16.8 tons 18.2 tonnes
GVW 40.0 tons 36.4 tonnes
SAE Telescopic Dump Box Volume*
Struck 11.5 yd3 8.8 m3
Heaped 14.2 yd3 10.8 m3
*Other teledump box sizes available to suit specific weight of material to be hauled.
Overall Dimensions
Length 27'-8" 8 430 mm
Width 8'-3" 2 515 mm
Height over teledump body sides 7'-5" 2 260 mm
Height req'd at max. teledump angle 10'-0" 3 050 mm
Maximum teledumping angle 60°
Turning Radius
Inside 12'-4" 3 760 mm
Outside 22'-9" 6 935 mm
Angle of turning radius 42°
Engine Up
Make Detroit Diesel
Model Series 50 DDEC with Electronic Control Management System
Power 300 HP (224 kW) @ 2100 rpm
Cylinders 4-cylinder, inline, 4-cycle
Aspiration Turbocharged, after cooled
Displacement 518 in3 (8.5 L)
Starter 24 volt electric
Air intake cleaner Donaldson two-stage dry-type with service gauge
Exhaust system Catalytic purifier with integrated silencer
Cooling Water and air to air, inter-cooled
MSHA part 7-B vent rate 15 500 CFM (439 m3/min)
Torque Converter
- Integrated with transmission
Powershift Transmission
Make Dana SOH
Model 14.5HR36000 series
Speeds in forward/reverse 4
Axles
Make Dana SOH
Model 16D on front and rear with high traction differential and POSI-STOP brakes on all four
Dynamic load capacity/axle 42,000 lb (19 051 kg)
Tires
- Bridgestone, 16.00-25,24 ply, (other makes and sizes available)
Brakes Up
Service Four-wheel POSI-STOP totally enclosed multi-disc, liquid cooled, spring applied hydraulically released with accumulator back-up and its own independent circulating cooling system
Emergency/Parking Same as service (POSI-STOP)
Automatic Brake Applicator Applies secondary brake in case of engine failure or pressure drop in torque converter
Teledump Box
- Extra heavy-duty two-section design with double acting telescopic dump cylinders and 2 ejector cylinders
- Teledump box made from impact, wear resistant alloy steel plates that are reinforced, lengthens service life substantially
- Teledump box supported on rugged tipping frame, teledumping action is guided by 2 heavy-duty bottom roller bearings that run along hardened tracks and 2 extra heavy-duty adjustable and replaceable slide arrangements on top of teledump box
Tank Capacities
Hydraulic oil 83 gallons 314 L
Fuel 83 gallons 314 L
Brake cooling oil 25 gallons 95 L
Options
- Different engine
- Automatic lubrication system
- Fast fill system
- Fire suppression system
- Automatic tail gate
- FOPS/ROPS MSHA canopy or enclosed fully equipped operator cab
- Load measuring device
- Back-up camera with display monitor
- For more information on this product, other options or custom-built equipment; please contact us or submit appropriate questionnaire form
Specifications subject to change without notice.
Up

DUX Machinery Corporation